|
Double-spindle
vertical lathe with CNC models PAB-350
– is a lathe with the spindles and parts
attached to them that are positioned vertically above the fixed instrument and
move along the main axes. Basically it is two lathes in one operating zone.
Lathe control system ensures independent rotation around the C1 and C2 axes and
travel along the X1, X2 and Z1, Z2 of the two spindles. This allows induction of
the advanced cutting operation and fully utilize potential of the cutting
instrument by the world leading manufacturers (SANDVIK, KENNAMETAL) with
simultaneous crushing of the cutting waste and also allows to adjust both
spindles independently.
Horizontal double-spindle lathes with CNC series PAB: models
PAB-130 and PAB-160 Intended
for processing of such parts as flanges, bushes, gears, bearing rings, etc.
Processing is executed either in sequence (two sides of the same part) or as two
parallel processes. This way full part processing is accomplished without
intermediate transportation and storage. Main application area is commercial
mechanical-engineering. Double-spindle lathe occupies smaller space and contains
fewer elements than two single-spindle lathes.
| 
