VIDEO DATA:

1. General information reel

2. PAB-350

3. PAB-130

4. PAB-130 with the 3-indexing chuck

5. ÒÀÊ-101

6. Soft and codec's for video.

PHOTOS:

1. Horizontal twin-spindle CNC lathes of models PAB-130 and PAB-160 for full processing of the workpiece.

2. Vertical twin-spindle CNC lathes of model PAB-350 with enriched technological capabilities for full processing of the workpiece.

3. Metal-turning unit system TÀÊ-101, TAK-102, TAK-103 on the base of an operational lathe of model ÊÀ-608 for full processing of the workpiece.

SPECIAL EQUIPMENTS:

Horizontal twin-spindle CNC lathes of models PAB-130 and PAB-160

drawing of the part "Shell"

drawing of the part "Well`s cut"

drawing of the part 169.01.04.25.00.002.jpg

drawing of the part ZPKM-43-DN-005.jpg

draft of the blank ZPKM-43-DN-005.jpg

draft of the left spindle_ZPKM-43-DN-005.jpg

draft of the right spindle_ZPKM-43-DN-005.jpg

draft of the left spindle R.32205B.HTPR.jpg

draft of the right spindle R.32205B.HTPR.jpg

Vertical twin-spindle CNC lathes of model PAB-350

drawing of the part "brake disk" 08.3147.10.jpg (356 Kb)

draft of the blank "brake disk" 08.3147.00.jpg (175 Kb)

draft of the "brake disk" 08.3147.10.jpg (292 Kb)

drawing of the part "cover of the electric motor" BIMP.712242.196.jpg (743 Kb

draft of the "cover of the electric motor" BIMP.712242.196.jpg (323 Kb)

Metal-turning unit system TAK-101, TAK-102, TAK-103 on the base of an operational lathe of model ÊÀ-608

example (TIFF, 151.1kb)